APC Back-UPS 700VA, 230V, AVR, IEC Sockets | BX700UI


Key Features

  • Run time for load 390 W – 1m
  • Max. Capacity Used – 100%
  • Output power capacity – 390 Watts / 700VA
  • Output Connections – (4) IEC 60320 C13 (Battery Backup), (1) IEC Jumpers (Battery Backup)
  • Nominal Output Voltage – 230V
  • Nominal Input Voltage – 230V
  • Input Connections – IEC 60320 C14
  • Cord Length – 1.2meters

In stock

AED300.00 AED499.00

In stock

APC Back-UPS 700VA, 230V, AVR, IEC Sockets

Battery Backup & Surge Protector for Electronics and Computers
Includes: User manual
APC Back-UPS 700VA, 230V, AVR, IEC Sockets
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Telephone dataline surge protection  Provides protection of connected equipment from power surges traveling on telephone lines.
USB connection  Use your PC to access additional power protection and management features for your UPS via a USB Port.

Back-UPS Features & Benefits


Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets  Back up and protect your hardware and data during power outages, surges and spikes.

Marketing features

Battery-protected and surge-only outlets  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment


Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.


Audible alarms Provides notification of changing utility power and UPS power conditions
LED status display  Quickly understand unit and power status with visual indicators.


Automatic self-test  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management  Maximizes battery performance, life, and reliability through intelligent, precision charging.
Categories: , Tags: ,


Max Configurable Power (Watts)  390 Watts / 700VA
Output Frequency (sync to mains)  50/60 Hz +/- 1 Hz Sync to mains
Topology  Line interactive
Waveform type  Stepped approximation to a sinewave
Transfer Time  4 ms typical


Input frequency  50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations  140 – 300V
Number of Power Cords  1

Batteries & Runtime

Battery type Lead-acid battery
Typical recharge time  6hour(s)
Replacement Battery  APCRBC110
Expected Battery Life (years)  3 – 5
RBC Quantity  1
Battery Charge Power (Watts)  14 Watts
Battery Volt-Amp-Hour Capacity  81
Runtime  View Runtime Graph

View Runtime Chart

Efficiency  View Efficiency Graph

Communications & Management

Interface Port(s)  USB
Control panel  LED status display with on line : on battery : replace battery and overload indicators
Audible Alarm  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating  273Joules
Data Line Protection  RJ11 modem/fax/DSL protection (two wire single line)


Maximum Height  200MM, 20.0CM
Maximum Width  115MM, 11.5CM
Maximum Depth  256MM, 25.6CM
Net Weight  6.0KG
Shipping weight  6.5KG
Shipping Height  275MM, 27.5CM
Shipping Width 295MM, 29.5CM
Shipping Depth  340MM, 34.0CM
SCC Codes  10731304315800


Operating Temperature 0 – 40 °C
Operating Relative Humidity  0 – 95 (Non-condensing) %
Operating Elevation  0 – 3048meters
Storage Temperature  -15 – 40 °C
Storage Elevation  0 – 9144meters
Audible noise at 1 meter from surface of unit  45.0dBA


Standard warranty  2 years repair or replace

Sustainable Offer Status

RoHS Compliant

Recently viewed products

How can I help you?

Click to chat with our customer care executive on WhatsApp.