APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V | BV800i-MSX


Key Features

  • Run time for load 450 W —
  • Max. Capacity Used – 100%
  • Output power capacity – 450 Watts / 800VA
  • Output Connections – (4) Universal receptacle (Battery Backup)
  • Nominal Output Voltage – 230V
  • Nominal Input Voltage – 230V
  • Input Connections – BS1363A British
  • Cord Length – 1.5meters

In stock

AED299.00 AED499.00

In stock

APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V

APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: User manual
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Easy UPS Features & Benefits


Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.
Sleek design  Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Cold-start capable  Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)  Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.


LED Indicators  Provide easy-to-read status of the unit and utility power conditions.
Audible alarms  Provides notification of changing utility power and UPS power conditions


Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.


Battery backup and surge protection  Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Battery and surge protected outlets  Back up and protect your hardware and data during power outages, surges and spikes.


Battery failure notification  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management  Maximizes battery performance, life, and reliability through intelligent, precision charging.
Advanced Safety Features  Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.


Categories: , Tags: ,



Max Configurable Power (Watts)  450 Watts / 800VA
Output Frequency (sync to mains)  50/60 Hz +/- 1 Hz Unsynchronised
Topology  Line interactive
Waveform type  Stepped approximation to a sinewave
Transfer Time  6 ms typical : 10 ms maximum


Input frequency  50/60 Hz +/- 5 Hz Auto-sensing
Input voltage range for main operations  170 – 280V
Number of Power Cords  1

Batteries & Runtime

Battery type Lead-acid battery
Expected Battery Life (years)  3 – 5
Efficiency  View Efficiency Graph

Communications & Management

Control panel  LED Status display with on line : on battery
Audible Alarm  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating  156Joules


Maximum Height  93MM, 9.25CM
Maximum Width  161MM, 16.05CM
Maximum Depth  305MM, 30.5CM
Net Weight  5.3KG
Shipping weight  5.6KG
Shipping Height  237MM, 23.7CM
Shipping Width  143MM, 14.3CM
Shipping Depth  373MM, 37.3CM
Color  Black
SCC Codes  10731304344084


Operating Temperature  0 – 40 °C
Operating Relative Humidity  0 – 90 %
Operating Elevation  0 – 2032.1meters
Storage Temperature  -20 – 50 °C
Storage Elevation  0 – 15240meters
Audible noise at 1 meter from surface of unit  40.0dBA
Protection Class  IP20


Approvals CE
Standard warranty  2 years repair or replace

Sustainable Offer Status

RoHS  Compliant

Recently viewed products

How can I help you?

Click to chat with our customer care executive on WhatsApp.