fbpx
-12%
,

APC Smart-UPS SRT 10000VA RM 230V | SRT10KRMXLI

SKU: APC Smart-UPS
APC

Key Features

  • Run time for load 1000 W – 3m
  • Max. Capacity Used – 100%
  • Output power capacity – 10.0kWatts / 10.0kVA
  • Rack Height – 6U
  • Output Connections –
  • (3) IEC Jumpers (Battery Backup)
  • (6) IEC 320 C13 (Battery Backup)
  • (1) Hard Wire 3-wire (H N + G) (Battery Backup)
  • (6) IEC 60320 C13 (Battery Backup)
  • (4) IEC 60320 C19 (Battery Backup)
  • (4) IEC 320 C19 (Battery Backup)
  • Nominal Output Voltage – 230V
  • Nominal Input Voltage – 230V, 400V 3PH
  • Input Connections – Hard wire 3-wire (1P + N + E), Hard wire 5-wire (3P + N + E)

Key Features

  • Run time for load 1000 W – 3m
  • Max. Capacity Used – 100%
  • Output power capacity – 10.0kWatts / 10.0kVA
  • Rack Height – 6U
  • Output Connections –
  • (3) IEC Jumpers (Battery Backup)
  • (6) IEC 320 C13 (Battery Backup)
  • (1) Hard Wire 3-wire (H N + G) (Battery Backup)
  • (6) IEC 60320 C13 (Battery Backup)
  • (4) IEC 60320 C19 (Battery Backup)
  • (4) IEC 320 C19 (Battery Backup)
  • Nominal Output Voltage – 230V
  • Nominal Input Voltage – 230V, 400V 3PH
  • Input Connections – Hard wire 3-wire (1P + N + E), Hard wire 5-wire (3P + N + E)
Availability:

In stock

AED15,420.00 AED17,500.00

In stock

APC Smart-UPS SRT 10000VA RM 230V
APC Smart-UPS SRT 10000VA RM 230V
High density, double-conversion on-line power protection with scalable runtime
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Temperature probe, USB cable, Warranty card, Web/SNMP management card
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.

Smart-UPS On-Line Features & Benefits

Availability

Scalable runtime Allows additional run time to be quickly added as needed.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.

Adaptability

Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.

Serviceability

Disconnected battery notification Warns when a battery is not available to provide backup power.
Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement.
Audible alarms Provides notification of changing utility power and UPS power conditions
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Protection

Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Cold-start capable Provides temporary battery power when the utility power is out.
Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.
Input Power Factor Correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.

Marketing features

Avoids costly power problems by keeping your IT equipment and data protected and available . Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Low operating and maintenance costs with proven reliability and intelligent battery management . Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Save time with easy and convenient remote/network accessibility. Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Manageability

Serial connectivity Provides management of the UPS via a serial port.
SmartSlot Customize UPS capabilities with management cards.
LED status indicators Quickly understand unit and power status with visual indicators.
Network manageable Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
BRANDS

Specification

Output

Max Configurable Power (Watts) 10.0kWatts / 10.0kVA
Output Voltage Distortion Less than 2 %
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages 220, 240
Load Crest Factor 3 : 1
Topology Double conversion online
Waveform type Sine wave
Bypass Internal bypass (automatic and manual)

Input

Input frequency 40 – 70 Hz Auto-sensing
Input voltage range for main operations 100 – 275 Adjustable (half load), 160 – 275, 173 – 476 Adjustable (half load)V
Other Input Voltages 220, 240, 380, 415

Batteries & Runtime

Battery type Lead-acid battery
Typical recharge time 1.5hour(s)
Nominal Battery Voltage +/- 192 V (split battery referenced to neutral)
Replacement Battery APCRBC140
Expected Battery Life (years) 3 – 5
RBC Quantity 2
Battery Charge Power (Watts) 1.195kWatts
Extendable Run Time 1
Extended Run Options APC-Smart-UPS-SRT-10000VA-RM-230V
Runtime
Efficiency View Efficiency Graph

Communications & Management

Interface Port(s) RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
Control panel Multifunction LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severity
Emergency Power Off (EPO) Yes
Available SmartSlot™ Interface Quantity 1

Surge Protection and Filtering

Surge energy rating 480Joules

Physical

Maximum Height 263MM, 26.3CM
Maximum Width 432MM, 43.2CM
Maximum Depth 715MM, 71.5CM
Net Weight 111.82KG
Shipping weight 130.0KG
Shipping Height 461MM, 46.1CM
Shipping Width 600MM, 60.0CM
Shipping Depth 1000MM, 100.0CM
Color Black

Environmental

Operating Temperature 0 – 40 °C
Operating Relative Humidity 0 – 95 (Non-condensing) %
Operating Elevation 0 – 3048meters
Storage Temperature -15 – 45 °C
Storage Elevation 0 – 15240meters
Audible noise at 1 meter from surface of unit 55.0dBA
Online thermal dissipation 1947.0BTU/hr
Protection Class IP20

Conformance

Approvals CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE
Standard warranty 3 years repair or replace (excluding battery) and 2 years for battery

Sustainable Offer Status

RoHS Compliant

Recently viewed products

How can I help you?

Click to chat with our customer care executive on WhatsApp.