, ,



In stock

AED479.00 AED509.00

In stock

24-Port 10/100/1000Base-Twith 4 SFP Smart Switch


Image result for GIGABIT DGS1210-28
  • 24  Port 10/100/1000 Base-T  + 4 x Combo Gigabit UTP or Gigabit SFP slots
  • Equipped with IEEE 802.3az Energy Efficient Ethernet (EEE) Complaint
  • Support  IEEE 802.1Q VLAN traffic segregation
  • Access Control List (ACL) feature to enhances network security
  • Auto Surveillance VLAN for easy integration with IP-based surveillance systems
  • Loopback detection (LBD) and broadcast storm control to avoid network downtime
  • Quality of Service (QOS) and bandwidth control to ensure smooth operation
  • Support Web-based GUI, Smart Console , Network Assistance Utility
  • Cable diagnostics function to help troubleshooting wiring problem
The DGS-1210 Series is the latest generation of D-Link Web Smart Switches featuring D-Link Green 3.0 technology. The series complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensure your network remains protected after the upgrade from IPv4 to IPv61. By offering multiple management options, the DGS-1210 series allows quick deployment, infrastructure expansion, and seamless function upgrades. Targeting small and mediumsized businesses, the DGS-1210 Web Smart Switches provide functionality, security, and manageability for a fraction of the standard cost of ownership.

The new DGS-1210-28P is a PoE Web Smart Switch that provides 24 10/100/1000 Base-T PoE ports with 4 Gigabit SFP ports. In addition to IEEE 802.3af compliance, ports 1-4 provide up to 30 watts of power output following IEEE 802.3at. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS 1210 28 B1 Image L Side 5720b1ebc12cb
DGS 1210 28 C1 SFP Energy Saving

DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS- 1210 switches offer advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom time profiles. The time profiles can also be applied to the PoE switch so that unnecessary power consumption can be saved during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.

Easy Management

The D-Link Web Smart Switch series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. In the first installation, the SmartConsole Utility will automatically discover all D-Link Smart switches in the network, allowing administrators to assign IP addresses and the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. Important management commands, such as download firmware or configuration file, offer a sophisticated method of batch operations for multiple switches.

DGS 1210 GUI 01
DGS 1210 surveilance 01 Auto Surveillance VLAN and Voice VLAN

The D-link Web Smart series automates the process of setting up IP surveillance and VoIP devices on a network. Auto Surveillance VLAN consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic are at their highest levels. Similarly, the Auto Voice VLAN guarantees clear quality and efficient transmission for all voice communication.

Extensive Layer 2 Features

Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature designed primarily for adminstrators and customer service representatives, can rapidly discover the type of error and determine the cable quality.

D View GUI 02 Secure your Network

D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.



Standards and functions of ports + IEEE 802.3 10BASE-T Ethernet (copper twisted-pair)
+ IEEE 802.3u 100BASE-TX Fast Ethernet (copper twisted-pair)
+ IEEE 802.3ab 1000BASE-T Gigabit Ethernet (copper twisted-pair)
+ Auto-ANSI / IEEE 802.3
+ IEEE 802.3x Flow Control
Number of Ports 24-port 10/100/1000 Mbit / s, 4 SFP ports
Network Cables + UTP category. 6, 5, 5e (max. 100 m)
+ EIA / TIA-568 100 ohm STP (max. 100 m)
Full / half duplex + Full / half duplex speed for 10 / 100Mbit / s
+ Full duplex for Gigabit speed
Interfaces transmission medium Interfaces with support MDI / MDI-X


Bandwidth switch 58 Gbit / s
Transmission Method Store-and-forward
MAC-address table 16,000 records
Study of MAC-addresses + Up to 256 static entries MAC-addresses
+ Enable / disable MAC-address avtoizucheniya
Maximum speed forwarding 64-byte 41.7 Mpps
Packet buffer memory 1 MB on the device


Layer 2 functions + Table MAC-addresses: 16,000 records
+ Flow Control
– 802.3x Flow Control
– Prevent blocking HOL
+ Support for Jumbo-frames up to 10,000 bytes
+ IGMP Snooping
– IGMP v1 / v2 Snooping
– Supports up to 256 IGMP-groups
– Supports up to 64 static multicast groups
– Supports IGMP Snooping Querier
+ Spanning Tree Protocol
– 802.1D STP
– 802.1w RSTP
+ Loopback Detection
+ 802.3ad Link Aggregation: max. the number of groups on the device 14/8 ports per group
+ Port Mirroring
– One-to-One
– Many-to-One
– Supports Mirroring for Tx / Rx / Both
+ Cable Diagnostics
+ Customizable interface MDI / MDIX
+ Multicast Filtering
– Redirect all unregistered groups
– Filtering of unregistered groups
VLAN + 802.1Q
+ VLAN Group
– Max. 256 static VLAN groups
– Max. VID 4094
+ Management VLAN
+ Asymmetric VLAN
+ Auto Voice VLAN
– Max. 10 user defined OUI
– Max. 8 by default defined OUI
+ Auto Surveillance VLAN
QoS (Quality of Service) + 802.1p Quality of Service
+ 4 queues per port
+ Processing Queue
– Strict
– Weighted Round Robin (WRR)
+ CoS based
– 802.1p Priority Queues
– TOS1
– Non-TCP / UDP port 1
– Class 1 IPv6 traffic
+ Bandwidth Management
– Based on the port (incoming / outgoing, in increments of up to 64 Kb / s)
Access Control Lists (ACL) + 50 profiles (maximum)
+ Max. 240 Access Rules
+ ACL on the basis of
– MAC-addresses
– IPv4-address (ICMP / IGMP / TCP / UDP)
– 802.1p priority
– Class 1 IPv6 traffic
+ Actions ACL
– Allow
– Prohibit
Security + Port Security
– Supports up to 64 MAC-addresses per port
+ Protection against broadcast / multicast / unicast storm
+ Static MAC-address
+ D-Link Safeguard Engine
+ Function DHCP Server Screening
+ Preventing ARP Spoofing Attacks
– Max. 64 entries
– Support v1 / v2 / v3
– Support IPv4 / IPv6 1
+ Traffic Segmentation
+ Intelligent binding
– Detection of connected devices and their binding
– Inspection of ARP-packets: 512 entries
– Inspection of IP-packets: 128 entries
– Support for DHCP Snooping
+ Authentication 802.1X port-based
– Support for RADIUS-server
– Support for EAP, OTP, TLS, TTLS, PEAP
+ Cable Diagnostics
+ Return to factory settings
+ 1213 MIB II
+ 1493 Bridge MIB
+ 1907 SNMP v2 MIB
+ 1215 Trap Convention MIB
+ 2233 Interface Group MIB
+ D-Link Private MIB
+ Power-Ethernet MIB
+ D-Link ZoneDefense MIB
Compliance with RFC
+ RFC 783 TFTP
+ RFC 854 Telnet-server
+ RFC 951 BootP / DHCP-client
+ RFC 1157 SNMP v1, v2, v3
+ RFC 1191 Path MTU Discovery
+ RFC 1215 MIB Traps Convention
+ RFC 1350 TFTP
+ RFC 1493 Bridge MIB
+ RFC 1542 BootP / DHCP-client
+ RFC 1769 SNTP
+ RFC 1901 SNMP v1, v2, v3
+ RFC 1907 SNMP v2 MIB
+ RFC 1908 SNMP v1, v2, v3
+ RFC 2068 FCS
+ RFC 2131 BootP / DHCP-client
+ RFC 2138 RADIUS authentication
+ RFC 2139 RADIUS authentication
+ RFC 2233 Interface Group MIB
+ RFC 2246 SSL
+ RFC 2475
+ RFC 2570 SNMP v1, v2, v3
+ RFC 2575 SNMP v1, v2, v3
+ RFC 2598 CoS
+ RFC 2616 FCS
+ RFC 2618 RADIUS authentication
+ RFC 2819 RMON v1
+ RFC 2865 RADIUS authentication
+ RFC 3164 System Log
+ RFC 3195 System Log
+ RFC 3411-17 SNMP
+ RFC 3621 Power Ethernet MIB
Management + Multilingual Web-based GUI
– English (default)
– Simplified Chinese
– Traditional Chinese
– French
– German
– Italian
– Japanese
– Portuguese
– Russian
– Spanish
+ The SmartConsole
+ Simplified CLI
+ Telnet-server
+ TFTP-client
+ IPv6 Neighbor Discovery 1
+ Customizable network interfaces with support MDI / MDIX
– Support v1 / v2 / v3
+ SNMP Trap
+ System Log
– Max. 500 log entries
+ BootP / DHCP-client
+ ICMPv6 1
+ IPv4 / IPv6 Dual Stack 1
+ Automatic DHCP configuration
+ RMONv1
+ PoE on the basis of time (only models supporting PoE)
Technology D-Link Green 3.0
+ Energy saving:
– In various states of connection
– Depending on the cable length
– When you turn indicators or ports
– In standby mode, the ports
– In sleep mode, the system
The input power 100-240 VAC, 50/60 Hz, internal universal power supply
Maximum power consumption 16.81 W
Power consumption in standby mode 5.9 W / 110 V, 6.42 W / 240
The number of fans 0
Noise level 0 dB
Heat release 57.36 BTU / hr
Working temperature -5 ° to 50 ° C
Storage temperature -20 ° to 70 ° C
Working Humidity From 0% to 95% non-condensing
Humidity Storage From 0% to 95% non-condensing
Dimensions + 440 mm x 140 mm x 44 mm
+ Size for installation in a standard 19-inch rack, 1U height
2.9 kg
Diagnostic Lights + Power (per device)
+ Link / Activity / Speed(per port 10/100/1000 Mbit / s)
+ Link / Activity / Speed(Per Port SFP)
MTBF 236.739 h
Certifications + FCC Class A
+ CE Class A
+ ICES-003
+ VCCI Class A
+ C-Tick
Security + CUL


Recently viewed products

How can I help you?

Click to chat with our customer care executive on WhatsApp.